-
Hi Shaoziyang,
Many thank for putting the firmware on github.
I try the firmaware with STM32-Link Utility but the SensorTile did not work.
I extracted the SENSORTILE_board_support.zip into micr…
-
Currently, Trainer mode only allows PPM or SBUS input. I am requesting CRSF input for Trainer mode.
Here is why.
I place a receiver in the JR module bay and connect the receiver to the Batt, Gro…
-
Dear IntergatedCircuits,
(I have pressed enter by mistake, that was the cause of initial empty issue...)
I put your code on an STM32F103C8T6 board together with USBDevice in Eclipse + HAL projec…
VaZso updated
4 years ago
-
@conuthead
for comparison :
blheli32 Wraith32 50A
f051bldc Wraith32 32A
your fw works well with 3S.
with 4S it desynchs at (1770 PWM).
Overall the efficiency N/W is better than blheli (on…
-
#### Issue details
Our team has designed a new autopilot hardware based on ESP32 microcontroller (includes Xtensa LX6 Dual Core processor). Initial details of the hardware can be found at https://sid…
-
I must admit I was very sad when I received my S42Bs and they didn't work well (display issues, skewed prints, steps missing, ...). At the time fixes for said problems were not available on this githu…
-
Hello all, in PZEM-004Tv3.0 version, how do we can see the direction of energy? In the older version the IC have a output that indicate the direction of energy ... like this article [https://github.co…
-
Practically everywhere you go, every review and every lenovo thread, about the trackpoint 2 keyboard, there's this persistent issue of being unable to swap the FN and CTRL keys somehow, which is amazi…
-
Dear Bruno,
my congratulations for squeezing a RV32I core into the Icestick !
I read your Verilog files with joy and I wish to share an idea on how to save a few more LUTs for more peripherals: …
-
Ajatuksena olisi tehdä tutka sählymaaliin. Tutka mittaisi laukauksen nopeuden ja ilmoittaisi sen näytöllä vetäjälle.
Mikäli tutka-projekti osoittautuu kelvottomaksi, niin toisena vaihtoehtona Ollill…