-
-
I am trying to make the watermeter, but my ESP bootloops. I have double checked the CC1101 wiring, but I am not sure if that could cause it. I am looking for a direction to look for to find the issue.…
-
Hello everyone, here I add a w83795adg and two temperature sensors on it, but they have no effect.I checked the experience of other people in the list and found that my / sys / class / hwmon did not g…
wws66 updated
4 years ago
-
### Board
ESP 32 dev module
### Device Description
Plain module on breadboard with micro-sd card reader attached.
### Hardware Configuration
MISO -> 19
MOSI -> 23
CS -> 5
SCK -> 18
### Versio…
-
[Description of the bug or feature]
Everytime the stock kernel updates, the default-kernel.path service does not trigger and update the default kernel back to linux-surface. I have to manua…
-
Hi,
i am experiencing some issue with my Surface Go and Alpine Edge:
1. Booting from cold boot works normally, after resting for a few hours
2. When rebooting a few times or shutting …
-
I am trying to use the simulator to change course from 50 deg to 60 deg. Would this be correct syntax?
$AGAPB,A,A,0.10,R,N,A,A,011,M,DEST,50,M,60,M*7F
-
Failing to boot any of the Debian images listed on https://sd-card-images.johang.se/boards/nanopi_r2s.html on FriendlyElec NanoPi R2S V1.0 1912.
I used this [uBoot image, 2024-01-01](https://dl.sd-…
-
Не должен ли сигнал PWDATA на времянках "pic12.png" и "pic13.png" называться PRDATA, поскольку на них иллюстрируется транзакция чтения из слэйв-устройства?
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…