-
```
What steps will reproduce the problem?
I have an APM2. Right now it is fully functioning. To be clear:
1. It has 4 servos hooked up, 2 aileron (Y split cable to one channel), 1
elevator 1 ru…
-
```
What steps will reproduce the problem?
I have an APM2. Right now it is fully functioning. To be clear:
1. It has 4 servos hooked up, 2 aileron (Y split cable to one channel), 1
elevator 1 ru…
-
I am using the AmigaStore version of the A4000DB 1.2. When using my arananet RGA to VGA converter, things look fabulous on my Dell U2410. But when using the VGA bracket connected to the daughter board…
-
Just a suggestion for V3 hardware: As the quality of power delivered via USB can vary substantially between different sources (5.25v to 4.4v allowable), I would recommend using the Nano's 5v regulator…
-
The Caravel has 4 power domains, 2 digital with 1.8 VDD and 2 analog with 3.3 VDD. In my project, I use four separate "digital" power domains, so I will need to use the analog domains for digital circ…
-
**Describe the bug**
I'm trying to interface the TLE5012B E1000 to an Arduino Nano and am having a hard time making it work reliably. The sensor is wired to the Nano D11,D12 (data), D13 (sck), and D1…
-
The motor control board has a set of LEDs that seem to indicate the current battery capacity - there are 4 LEDs and they appear to turn off as the batteries drain. Is there any way that the pi could q…
-
A LoRa module is connected to ESP8266 via SPI (not the flash SPI but: MOSI GPIO13, MISO GPIO12, SCK GPIO14) to an `ESP8266.
Scenario 1: When the ESP8266 is started up without the LoRa module on the S…
-
```
What steps will reproduce the problem?
I have an APM2. Right now it is fully functioning. To be clear:
1. It has 4 servos hooked up, 2 aileron (Y split cable to one channel), 1
elevator 1 ru…
-
```
What steps will reproduce the problem?
I have an APM2. Right now it is fully functioning. To be clear:
1. It has 4 servos hooked up, 2 aileron (Y split cable to one channel), 1
elevator 1 ru…