-
**Summary:**
It would be nice to be able to tell which satellites on Sky view the device has multiple frequencies for.
This could be accomplished via re-using the filter currently used in Statu…
-
i have builded the project ok,
then i run the command :
ros2 launch dual_plan dual_plan.launch.py
i got the message blow:
[INFO] [launch]: All log files can be found below /root/.ros/log/2024-…
-
In the example Stridemax_dual.cfg it appears that pins
spi_software_mosi_pin: stridemax_dual:**gpio4**
spi_software_miso_pin: stridemax_dual:**gpio3**
are incorrect per your pin out diagram of th…
-
Hi Schildkroet,
Can you add support for dual-motor axis?
The only difference is in homing procedure. Slave motor must have additional limit switch, then software can home two motors of one axis inde…
-
Are we overdoing the restoration of duals? The Greek text of course has none, and those in the MSS are mostly fossils: pairs of hands, eyes, legs; two exceptions are Digenis's father and beloved uncle…
-
In order to keep things simple for beginners it would be ideal if NOOBS was able to output on both HDMI ports. This would avoid the failure where someone flashes their SD-Card and only sees the Rainb…
-
One of the Y axis moves slower than the other causing issues during prints. I have no clue where to go from here.
`/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https:…
-
## Classification:
(Pick one of: Bug, Crash/Hang/Data Loss, Performance, UI/Usability, Feature (New), Enhancement)
## Reproducibility: Always
(Pick one of: Always, Sometimes, Rarely, Unable,…
-
Hi, do you have any plans to implement dual analog controls?
Thanks
-
Hotwav (AOSP 10 v.214) camera dual not support,hotspot not support