-
Filament not loading correctly
**Printer type** - MK3S
**Printer firmware version** - 3.13.3
**MMU upgrade** - MMU2S
**MMU upgrade firmware version** - 3.0.2
**SD card or USB/Octoprint**…
-
Every now and then I had the error that a pre_gate_sensor was triggered briefly by movement of the filament. Therefore, Happy Hare didn't load the gate and went on pause. Now I have written a query ma…
-
**Issue description**
When uploading a new gcode file during a print, the title of the project being printed changes to the last file uploaded.
**Printer type** - Mini+
**Printer firmware versi…
-
Is anyone else having a problem with a moving the module after upgrading to v14.1 or v14.2 ?
After upgrading to v14.1 > system restarts, but none of the axis can move. Not via manually jogging and …
-
**Printer type** - MINI
**Printer firmware version** - Snake MINI FW 6.0.1.1 - [Snake_MINI_6.0.1.1.bbf](https://github.com/Snake-Edition/P32-FW/releases/download/v6.0.1.1/Snake_MINI_6.0.1.1.bbf)
…
-
Please, before you create a new bug report, please make sure you searched in open and closed issues and couldn't find anything that matches.
**Printer type** - [MINI]
**Printer firmware version*…
-
When my delta homes it will stop one or more axes short of the endstop, then does its back off, and on the retest it starts for the endstops again but often (not always) stops short. In the end, some…
-
**Printer type** - MK4
**Printer firmware version** - Alpha 5.0.0-alpha2
**USB drive or USB/Octoprint**
Octoprint
**Describe the bug**
Printer fails to react to filament runout when pri…
-
Given that this unit is able to detect missed steps could this functionality be adapted to allow for sensorless homing ?
-
**Feature Request:** Temperature Sensor Calibration Tool and Troubleshooting Documentation
Marlin needs a feature where you can take a known calibrated temperature sensor/thermocouple and use it to…