-
Do not allow clients with very bad signal to throttle down the whole AP. See
https://lists.berlin.freifunk.net/pipermail/berlin/2016-July/033682.html
-
Branch: SAm0815_Hedy-alpha
(checked out via git today, 2017-12-26 15:00; built for PI3; TARGET=brcm2708-bcm2710)
Same behaviour in this image:
https://buildbot.berlin.freifunk.net/buildbot/unstable…
-
Think we can save some disc-space on buildslaves and makes buildprocess more nice by:
- building OpenWrt / LEDE
- copy all files we need to build our firmwarefiles (at least: imgbuilder, packages; i…
-
Seen on GL-AR150 / Freifunk Berlin Hedy 1.0.0-rc1 5c1dc9d
Seen on WR842v3 / Freifunk Berlin Hedy 1.0.0-rc1 732db7e
After "/etc/init.d/network restart", two SIGSEVs from the olsrd processes show up…
-
Hej,
it is not possible to use an individual mesh_id. Independent of the settings in
/etc/config/wireless
...
config wifi-iface
option device 'radio0'
option ssid 'smesh'
…
-
setup: ubnt-erx (uplink) ---lanmesh---wdr3600()-+-+wifi-mesh-+-+nanostation-m2
firmware:
- ubnt-erx: 493-vpn03-freifunk-berlin-1.0.0-alpha-sam0815-43478e9-ramips-mt7621-ubnt-erx-squashfs-sysupgrad…
-
It's possible to set up 802.11s in /etc/config/wireless, Latest Freifunk build Freifunk Berlin Hedy 1.0.0-olsrd0903-alpha 4d4151f r2993+442-b9a408c / LuCI lede-17.01 branch (git-17.152.82987-7f6fc16) …
-
Festgestellt auf WR1043v3 und Archer C7 (alles über Weboberfläche)
Die oben genannten Router verfügen über ein eth0 (WAN_Port) und eth1 (LAN-Ports), welche eigentlich keine VLAn benötigen, da eh scho…
-
our "fork" of luci-mod-freifunk is not building the i18n files and so we have only untranslated messages for the Freifunk-pages.
the complete i18n-support is missing in the Makefile
see https://lists…
-
#### Overview of the Issue
When trying to resolve `turk.node.gce-us-central1.admiral` via DNS no results are returned despite the node being listed in members.
```
consul members
Node Add…