-
Currently if there is ever a failed I2C transaction the firmware can lock up. This is a rare event usually but can easily occur if an I2C device such as the LED board is missing or otherwise non-commu…
-
```
what py reads
[245, 88, 249, 109, 241, 6, 240, 0, 240, 0, 240, 0, 240, 0, 240, 0]
what go reads
[248 213 255 255 240 0 240 0 240 0 240 1 240 1 240 8]
```
-
**What kind of new feature are you looking for?**
- Hardware: Support MPU9250 over I2C, currently only implementation uses SPI which is fine but many mixed chips like the GY-91 expose it as I2C. Anot…
-
Some laptop or 2-in-1 devices also equipped with digitizer
Tablet or graphic tablet normally use USB port
but these tablet PCs usually have I2C HID digitizer devices.
(usually, they were detecte…
-
- Arduino board: QtPy (M0) (n/a, issue should occur on any applicable board)
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.13
- List the steps to reproduce the problem b…
-
The recent i2c/spi driver changes and corresponding board level support has been a solid step forward, but one small thing we've lost is the configuration of on board I2C devices. In many cases the I2…
dagar updated
4 years ago
-
```
add support for I2C display
```
Original issue reported on code.google.com by `olikr...@gmail.com` on 13 Jun 2012 at 7:24
Attachments:
- [u8glib_avr_v1.04_changes_uc1610_dogxl160_hw_i2c.zip](htt…
-
```
add support for I2C display
```
Original issue reported on code.google.com by `olikr...@gmail.com` on 13 Jun 2012 at 7:24
Attachments:
- [u8glib_avr_v1.04_changes_uc1610_dogxl160_hw_i2c.zip](htt…
-
```
add support for I2C display
```
Original issue reported on code.google.com by `olikr...@gmail.com` on 13 Jun 2012 at 7:24
Attachments:
- [u8glib_avr_v1.04_changes_uc1610_dogxl160_hw_i2c.zip](htt…
-
```
add support for I2C display
```
Original issue reported on code.google.com by `olikr...@gmail.com` on 13 Jun 2012 at 7:24
Attachments:
- [u8glib_avr_v1.04_changes_uc1610_dogxl160_hw_i2c.zip](htt…