-
I'm using Altera Arria10 hps, when I install the driver with debug mode define DEBUG, no massage showing or new device to i2c devices
/sys/bus/i2c/device/0-0020 not showing,
@lainwir3d requestin…
-
环境：VMware虚拟机，Ubuntu14.04，64位，GCC4.8(后改为4.7，问题依旧)。
问题：执行
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- A13-Lichee_config
time make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- 2>&1 | tee build.log
…
-
I'm using a Waveshare ESP32-S3-Touch-LCD-7 board, 800 x 480, 8MB PSRAM, 8MB Flash, ST7262 display driver, GT911 touch driver. (https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-7#Overview)
Initiall…
-
```
Hi,
please find attached the necessary files to use some familiar EEPROM chips.
Such chips are a part of the new HAT standard for RPi adapter boards.
This driver is implemented inspired by the …
-
```
Hi,
please find attached the necessary files to use some familiar EEPROM chips.
Such chips are a part of the new HAT standard for RPi adapter boards.
This driver is implemented inspired by the …
-
```
Hi,
please find attached the necessary files to use some familiar EEPROM chips.
Such chips are a part of the new HAT standard for RPi adapter boards.
This driver is implemented inspired by the …
-
```
Hi,
please find attached the necessary files to use some familiar EEPROM chips.
Such chips are a part of the new HAT standard for RPi adapter boards.
This driver is implemented inspired by the …
-
```
Hi,
please find attached the necessary files to use some familiar EEPROM chips.
Such chips are a part of the new HAT standard for RPi adapter boards.
This driver is implemented inspired by the …
-
```
Hi,
please find attached the necessary files to use some familiar EEPROM chips.
Such chips are a part of the new HAT standard for RPi adapter boards.
This driver is implemented inspired by the …
-
### Foreword
I had to use the I2C in the peripheral mode in a project using Riot OS in order to make several cards communicating to each other in a bus topology.
However, this mode was impossibl…