-
Please accept my appologies if this is the wrong place to make a request I wasn't sure where to put it so followed previous posts.
I have no idea if this is easy or hard to do, but if it is at all …
-
-
Just a heads up.
The Camera LED GPIO has moved again on Pi3, so the current logic is unlikely to do the right thing. I haven't worked out the detail of controlling it as yet, or whether it is even pos…
-
### Version/revision of the library used
2.8.6
### Describe the bug
I am using IRremoteESP8266 for an IRBlaster project. It is working fine with many ACs that we tested (Voltas, carrier, coolix) …
-
I'm trying to make a drone fly autonomously using avoidance node, Jetson TX2, J120 carrier board and realsense D435i camera..
I'm now in the hardware phase, I used /tools/generate_launchfile.launch.d…
-
I have sort of misused issue #1 for discussing the pulse data format. The goal is to use your own meter reading setup and "spoof" tibber into thinking you're sending data from the Pulse. This is usefu…
-
I want to change the camera I use for Indi-allsky. Previously I was running an Altair Gpcam 130M. I've done an update and run sh.setup as per the instructions. I still can't see the new 678 on indi-al…
-
In the ldr.sh script the value coming out of:
/dev/jz_adc_aux_0 count=20 | sed -e 's/[^\.]//g' | wc -m >> /var/run/ldr
never seems to change and may be the root cause of the problem. i even p…
-
Hi
I'm now using Mint 20, Cinnamon 4.6.7, Linux 5.4.0-512010201020-generic, Hauppauge WinTV-Solo HD, GStreamer 1.16.2, pre-compiled Me TV 3.1.0 binary from Bintray
I cannot get the IR remote working…
-
Looks like it's not working
```
$ autonight -D /dev/jz_adc_aux_0 -v -d 1
Current value: 710.48
Current value: 710.12
Current value: 710.24
Current value: 710.72
Current value: 714.32
Window (5…