-
Hello,
I have a PACE bmc and I want to run it via RS232 (RS485 is used for the Solar Assistant). It works from the pbms tools but I cannot run this solution. However the Seplos solution https://gith…
-
I have an old Arduino Uno (not R3) with Ethernet W5100 Shield and a RS485 Adapter with Max1348 chip (GND, RXD, TXD, 5V). I use Arduino IDE 2.0.2 (but also tested legacy version 1.8.19).
So I commen…
-
First off, great work!
I have two SH10RT, is it possible to add both? I only have battery on one of them, the master, and that works like a charm but for information like current solar power, dail…
-
Hello, did you found way how 0x1B in reply should correctly modify XOR checksum?
Do you have any other EXOlink protocol description? I found only your code and https://www.swegon.com/globalassets/_pr…
-
Got everything setup. Everything is identical compared to the manual except Device serial Number and firmware. Mine is LSW3_14_FFFF_1.0.38 where in the screenshot inside manual is LSW3_14_FFFF_1.0.29…
-
Hi,
According to my understanding, it seems that esp-modbus does not support flow control?
Hardware flow control is not supported, and software flow control is not known to be supported.
What i…
-
### Versions
- Python: 3.9.2
- OS: Linux 6.1.21-v8+ aarch64 GNU/Linux
- HW: Raspberry Pi 4
- Pymodbus: `pymodbus==3.6.6`, `pyserial==3.5`
- Modbus Hardware (if used): n/a
### Pymodbus Speci…
-
### Describe the bug
when it works it's great, but frequently it becomes unavailable. I have 2 solax inverters and a victron. solax ones can just go unavailable, one or the other on their own or afte…
-
Hello. I have an EG4 18Kpv and I would love to help this project in testing/creating compatibility to read the inverter/battery data locally. I have the RS232 eth -> USB cable that came with it. Do I …
-
Hi, I have similar but 6500W version of inverter.
Is there any chance your protocol can be integrated with [this project](https://github.com/odya/esphome-powmr-hybrid-inverter)? I was trying to use t…