-
with SB2240 after 20/30 minutes of printing I get the error 'tmc "extruder" reports error : GSTAT: 00000004 uv_cp=1 (undervoltage!)
(Ldo nema 14 pancake run_current: 0.65)
both motor and board are…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hello, I have two STM32G0B1 devices, one is the BTT ercf board (MMB) and the other is an EBB42 toolboard.
I can scan for both devices with the flash_can.py tool.
```
Resetting all bootloader no…
-
### Describe the bug
I was checking how `master` (on commit `12b291b82f4dcc2a8b1c59b86fddeee0b675abe2`) was doing for these targets:
- mRo Control Zero H7
- mRo Control Zero OEM H7
- mRo Pixrace…
-
I see there is some bindings code already present for psram (https://github.com/esp-rs/esp-idf-sys/blob/5ca2e76feaeb73731ad3be0e1adf395d0a65361e/src/include/esp-idf/bindings.h#L24) but it is gated by …
-
### Category
Other
### Hardware
Other
### Firmware Version
2.3.2.63df972
### Description
I have installed on RPI3B 64bit Bookworm.
on running command "meshtasticd"
get the following error
…
-
The example below works fine until 50th frame count and than reset frame counter. ChirpStack Network Server gives frame counter reset or rollover error.
When I try it without deep sleep mode, it wor…
mofm updated
6 months ago
-
I was wondering if the Tuya Security Camera's may be possible. They work within the same app and I am able to get id and key in the normal manner. I tried to get the signature but don't see it in my l…
-
# ESPAltherma Community post!
> ESPAltherma is used all over the world! well... mostly in Europe... mainly in Germany ;)
> Let's show each other what we did with ESPAltherma!
> This will be nice …
-
when pressure test was performed, write() to can0 will stuck, and the "dmesg | grep spi" will report:
`[13378.996137] mcp25xxfd spi0.0 can0: Something is wrong - we got a TEF interrupt but we were …