-
### Description of the bug
I had a 4h35min print with 2h1m being spent on infills. I then adjusted both the Infill and Solid infill parameters in the Print settings from 80 to 100. I expected the tim…
-
### Version
PrusaSlicer-2.4.0+win64-202112211614
### Operating system type + version
Windows 10
### 3D printer brand / version + firmware version (if known)
Prusa i3 mk3s 3.10
### Behavior…
-
## Description
**ENTER DESCRIPTION HERE
Describe your problem? Slicer Not Detected Message
What is the problem? Slicer Not Detected Message
Can you recreate it? Yes, whenever I start a print
Did …
-
IOS 16.1. Stopped working after upgrade to v3.7
-
Hello, I am using a 0.4mm nozzle on an i3MK3S+. Over the years, I have tuned many parameters to fit my project and my specific printer. If I change the nozzle to one with a different diameter, what pa…
-
Has anyone tried to split up the vent into multiple parts? I want to print the 4x12 vent, but just rotating the parts won't get them to fit inside the print bed.
![image](https://user-images.githubus…
-
**Printer type** - MK3S,
**Printer firmware version** - [ 3.10.1
**SD card
print via SD card
**Describe the bug**
I was trying to update to a 3.11. It get stock always in verifyi…
-
**Is your feature request related to a problem? Please describe.**
Prusa Support said I can only use a mouse to change the layer height (which is not precise nor repeatable) or use
the Variable La…
-
### Description of the bug
PrusaSlicer properly slices a model for printing with a 0.4mm nozzle. When I select a printer profile for a 0.6mm nozzle and attempt to slice, PrusaSlicer crashes.
#…
-
### Description of the bug
When loading a simple stl and slicing it fails.
Repair stl, load the saved obj file and slicing it works.
### Project file & How to reproduce
Load stl and slice ca…