-
Hi, I'm runnning motioneye 0.42.1 on a raspberry pi 3 model B plus rev 1.3 (with raspbian 10) and am having issues with 1 out of my two cameras. One camera is completely fine but the second one is run…
-
I have a raspberry pi 4 8MB running with:
motionEye Version0.43.0
Motion Version4.3.2
OS VersionRaspbian 11
It is connected to 4x network-cameraes with motiontriggered recording enabled.
Unfor…
-
HI, the card is working well for me, but with a 10s video delay
I don't know if it's my configuration ( hassio on a raspberry pi ) but with anoter ip camera i have solved the problem with using :
…
-
On Pepper, dashboard is now shown on it's tablet. Video monitor is shown in the top left area, spectrum graph of input voice is shown in the top right area, and text input is show below the graph.
Ho…
-
Hi, thanks for such a cool project! I've been trying to create a similar project on circuits.io, but haven't gotten this far (I don't have any prior experience about pcb designing). My motivation is t…
-
### Preliminary Docs
I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
YES
I confirm t…
-
Hi,
I was running motioneyeos-raspberrypi3-dev20181008 with 4 cameras and one external 5 TB USB HDD for last two years without any issue. My setup is very similar to setup mentioned in this blog
h…
-
Hi,
I want to use the camera module v2, rotated by 90 degrees, on a 16:10 screen (1280x800), which is rotated also by /boot/config.txt line "display_rotate=3". All on a Raspberry Pi 1, 512 MB. I fa…
-
Hi, I've got 2 motioneyeos servers setup on a couple of Raspberry Pi's, one with the camera attached, the other acting as a host server to view the feed. The intention being to add more cameras over t…
-
This is maybe more like question than an issue:
Is it possible to "capture-image-and-download" without triggering AF first. I think, capture-preview does somethink like this, altough, i'm not reall…