-
Hi I am assuming that this will not support the new Raspberry PI 5 hardware?
Thanks
-
Hi,
I want to connect the octo soundcard directly to an fpga board like a spartan7 via gpio/pmod (or other is there a better way?). I can obviously do this through an rpi connected to the fpga but …
-
Feature Request
I'm interested in using this library with the GPIO expander mode from a PC (https://www.raspberrypi.org/magpi/pi-zero-gpio-expander/). That way I could plug in the pi 0 with an inky…
-
Hello,
i found no comment about the internal resistors and how they are set with rpi.2
It shoult be possible to configure the Resistor to Pull up or down when i set an GPIO as Input
Please Doku…
-
Since there are no buttons to spare on an NES or SNES controller and ideally we don't want to have a keyboard attached, a switch to exit the game is necessary.
Two options for switches:
Option 1:
r…
-
```
Unable to determine hardware version. I see: Hardware : BCM2835
,
- expecting BCM2708 or BCM2709. Please report this to projects@drogon.net
```
-
Hi,
I want to set a button to record voice only when it's pressed. I expect a call to functionCallRecordStop when released.
A saw here in issue topics about that here : #437 I think this belong to t…
-
After Saving a Configuration under the Options tab, any attempt to Load results in driver crash. If there are no Configuration files in the /home/stellarmate/.indi/ folder, the driver does not crash.…
-
When the Raspberry Pi is shutdown, but still connected to power, the backlight remains on. Is this behaviour configurable? Or should it be possible to toggle the backlight off by pulling the backlight…
-
Hi, I notice this project hasn't had much traction for a while, however any ideas what would be causing this?
`C:\>flutter pub global run rpi_gpio:build_lib --verbose
[ +93 ms] executing: [C:\flu…