-
I imported image, converted to gcode and then ran the job. I noticed that laser scanning feed speed of the raster was inconsistent. As in the speed was changing a lot for a single X line scan. The gco…
-
Would like to help port your libraries over to the BeaglBone Black (BBB). This issue started with a request comment on the TMRh20's Project Blog for March 2014 and a reply from TMRh20 with some initia…
-
Hallo, ich habe die aktuelle Version von YHAM auf meinem Raspi 2 mit dem Raspi Funkmodul am laufen. Ich stelle immer wieder mal fest, dass wenn man etwas starten, und dadurch ein oder mehrere Programm…
-
Hi,
Huginn ( many_gems_are_optional) runs in Production and Development mode on Raspbian.
It is very slow .. but that is ok for me now.
The XKCD Source / Website Agent is working but the jobs.1 log sh…
-
Hi all.
There has been talk already about lowering the bitrate to improve the communication range. I did it myself and I would like to share a few thoughts, with the hope that we could make that easi…
-
I am trying to run my xbox360 kinect on my raspberry pi 2. I have followed this guide ( https://github.com/xxorde/librekinect )without errors but at the last command ( make load ) gives me this error:…
-
alot of thought was put into this one to make the most out of the drone's capabilities ;)
upgrade slots:
T3 T2 T2
T1
my idea for something here:
[chunk loader] [solar] [battery]
[geolyzer]
card slot…
-
After compiling GobiSerial using sudo make install, using modprobe when the modem is inserted (it does not load by default) produces a kernel oops. DKMS is not an option if you want to use the latest …
-
When I run
```
./configure
make
```
I get the error
```
/home/pi/node_arm/scripts/node/node-v0.10.30/out/Release/libopenssl.a(armcap.o): In function `OPENSSL_cpuid_setup':
armcap.c:(.text.startup+0…
-
hmm, is there any way to add attachments in github?
Here's a single backtrace: http://pastebin.com/mek0rqn7
Here is the whole log (I didn't have a very large ringbuffer configured, but it's most of i…