-
### Describe the bug
When attempting to bind mount multiple btrfs subvolumes to an alternate location via `/etc/config/fstab`, only the last in the anonymous section is actually mounted.
### What …
-
### Describe the bug
When configuring device attributes in a XFRM interface, they are not applied.
### OpenWrt version
latest master
### OpenWrt release
latest master
### OpenWrt target/subtarge…
-
### Describe the bug
When applying any network settings the interface goes down and gets into the `DEVICE_CLAIM_FAILED`:
![image](https://github.com/openwrt/openwrt/assets/39808643/cffd9a1c-0d88-409…
-
I managed to get cmake to build the package after restarting the OS last night. However, the final step to setup the bindings in torch folder with fails.
Please help me understand what to do about…
-
### Bug report
**What is the problem?**
The ramips-mt7621 device ZyXEL NWA50AX does not run reliably in a wireless mesh with 3 such devices. In December 2022 the routers were installed using FFR…
-
### Attention | توجه
- [X] I searched and no similar issues were found | جستجو کردم و هیچ گزارش مشابهی پیدا نشد
### What Happened? | چه اتفاقی افتاده؟
سلام در نصب مشکل دارد :
(Reading database .…
-
I have multiple subnets and VLAN that the UDMP manages.
UDMP is running with firmware 1.8.6
My subnets:
192.168.1.0/24 Management (no VLAN)
10.0.10.0/24 Main VLAN 10
10.0.20.0/24 IOT VLAN 20
…
LUFEZ updated
3 years ago
-
Add a header and footer to all prototypes that hold information like:
- title
- UBU logo
- authors
- date (and time) last edited
- etc.
-
### Which version is your board?
Respeaker v1
It's caught in a reboot loop, even after flashing with latest firmware:
```
root@(none):/mnt# mount /dev/mmcblk0p1 /mnt/dos
[ 339.150000] [EXFA…
-
### Describe the bug
With testing kernel version 6.6.* on devices ramps/mt7621 the link speed auto-negotiation is broken (again). If another device uses 100Mbps speed (two-pairs cable or 100Mbps sp…