-
I installed your version of the chan-quectel plugin on a router with OpenWRT with a Simcom SIM7600E modem.
Asterisk 20.5.2, openwrt 23.05.3
Cannot establish a connection to the modem, a connection e…
-
Even though tycmd works at the computer which host the docker container, it doesn’t work in the docker container.
I am able to see the device in the docker container using `ls -l /dev/`.
I have …
-
Hello! Again I need your help.
Now I can not get ethernet working on my WD MBWE II with kernel 5.15.
I performed all, I think, your recommendations (some of them described [here](https://git.kernel.…
-
Hi there,
I'm using esp-wroom32 and i just noticed that when we turn the power ON (from usb or from a battery) calibration coef are 2x higher than what they should be. measurment are also 2 times hi…
-
I currently use sim7000E in my design but i decided to try make one board with 7070.
From what i undersand the only siginificant difference is with the reset pin that slould not be connected in 7070…
-
Hi there,
When I use the ESP32sim800l (KENEW Lilygo TTGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800L Module (CP2104 V1.4 Version))
with the USB-C it starts right away.
But wh…
-
I cannot figure out which pins to set for the reset script.
spi and i2c are enabled.
tyro@rpiz:~/LR1302_loraWAN/LR1302_HAL/sx1302_hal/packet_forwarder $ ./reset_lgw.sh start
CoreCell reset thro…
-
My Prok module (BD) was working perfectly fine after building (the three others are not finished yet). Great sound, perfect.
My tried the PDEditor for the first time (on OSX 10.13.6) seems to kill my…
-
When you first install the Gateway program or when it self-updates, it may not notice connected USB deployable devices. Unplugging/plugging or resetting the device may fix it, but sometimes not and s…
-
I started porting tinyuf2 (great project!) to the RISC-V GigaDevice GD32VF103 on the Sipeed Longan Nano Board, which has supposedly the same USB OTG peripheral as the STM32F105/107 or STM32F4s. Flash …