-
Hello! Thanks a lot for developing this helpful tool.
I find out that 2 USB devices can support PPPS but it doesn't take effect as I expected.
These 2 USB devices are
- [Lenovo LDA-KP USB doc](ht…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
background here: https://community.victronenergy.com/questions/240314/venus-os-v32014-available-for-testing.html
### Issues found after some discussion:
1. setuphelper install doesn't stop when …
-
**Describe the bug**
gstreamer crashes on low resolution (320x240, 640x480)
The pipeline:
```
$ gst-launch-1.0 v4l2src device=/dev/video0 ! video/x-raw,format=BGRA,width=640,height=480 ! videoco…
-
There seems to be a bug in serial-connection.js ("resol-vbus@0.25.0") which triggers an Unhandled promise rejection when a non-existent serial port is attempted to be opened. This can be fixed by remo…
-
As stated in the title, I know exactly how hard it is to remove those SMD cans, and solder in new ones on a crowded PCB.
@hominoids, what is a safe estimate of a UPS PCB top side clearance? Can we …
-
**Describe the problem you have/What new integration you would like**
Support for receive data over Rx from Resol Deltasol solar controller.
**Please describe your use case for this integra…
-
There doesn't seem to be a good consensus here, but the USB-C shield should maybe be isolated from signal ground.
Some references:
# Microchip: USB Type-C Layout Recommendations
Shield is con…
-
### Describe the bug
I am trying to get a device called [ThingMagic USB Pro UHF Reader](https://www.jadaktech.com/products/thingmagic-rfid/thingmagic-usb-pro-uhf-reader/) (a USB device) to work pro…
-
Hello
Thanks for the projects. I enjoy looking at your work, especially the code.
It does not seem to me the PCB is set up to support 100W (20V at 5A) The VBUS seems to be all routed through on…