-
```
What steps will reproduce the problem?
1. XBee modules in API mode 2, with XBee.h included in arduino file
2. Implement SoftwareSerial example using XBee.h as well
3. Upload to ATtiny chip using A…
-
```
What steps will reproduce the problem?
1. XBee modules in API mode 2, with XBee.h included in arduino file
2. Implement SoftwareSerial example using XBee.h as well
3. Upload to ATtiny chip using A…
-
```
Hi,
I wanted to try this lib with the 400 X 240 version of the display. Do you
know what is needed to get this larger display working as well?
Best regards,
Fritjof
```
Original issue reporte…
-
My simple network of 6 OTA arduino nodes and a few open Arduino IDE windows causes a massive flood of mDNS traffic.
The jmdns java package has a rather large issue relating to broadcast mDNS packet…
-
```
If communicating with Mach3 CNC software (ower USB) and write to multiple
Analog Outputs reg. then can't get answer from modbus library.
Mach3 sends hex: 01 10 00 00 00 05 0A 00 00 00 00 00 00 0…
-
```
If communicating with Mach3 CNC software (ower USB) and write to multiple
Analog Outputs reg. then can't get answer from modbus library.
Mach3 sends hex: 01 10 00 00 00 05 0A 00 00 00 00 00 00 0…
-
taskI2C does not detect I2C transmission errors. Instead, it will just return junk data.
This is because the MPU6050 library does not pass any errors from the I2CDev library to us, so we'll need to…
-
```
I am trying to connect my Raspberry Pi via SPI to the Arduino UNO with the RPi
as Master.
I have linked pin10 (SS) to pin2 (so there are no other pin changes on that
port) and attached an inter…
-
I decided to give this branch a go because zapmakers last release always freezes if there is any issues, like a lost connection to the arduino.
This was not a big deal so far, but since i connected m…
-
```
I am having a problem in Arduino-0017 where my Arduino crashes and restarts
repeatedly due to some sort of interaction between the LiquidCrystal,
Serial, and Wire (TWI/I2C) libraries. This issue …