-
**What version of OR-tools and what language are you using?**
Version: Trying to install OR Tools on a Mac OSX 11.1 with a M1 chip. No specific version.
Language: Python
**What operating system (…
-
I have some TB6600 drivers, which clunk sometimes, shifting an axis thus ruining a print. I need because I have a relatively large printer thus a large torque. These TB6600 are relatively slow chips, …
-
I have got all my motors going the correct way. I converted a Davinci 1.0 to Ramps 1.4. My Z end stop is at the top of the screw axis. If I set it to pin ar 18 it homes the correct direction and …
-
Hi,
Thank you very much for writing this program as it has allowed both official Arduinos (e.g. Nano Every) and other AVRs to be able to take advantage of UPDI in a cost effective manner.
I am c…
-
At the end of printjob, extruder tries to push about 5cm of filament at max speed with heater switched off and parking X axis. This looks like line N11369 is getting executed after line N11370 from my…
-
I'm working with a WS2812 strip and have tested it using the RGBCallibrate example program and the red LEDs are orange in FastLED V3.0.0.
They appear fine when tested with the Neopixel library. I th…
-
Hi I am trying to get the PWM working on an Arduino Uno on pins 5 and 6 to emulate the `analogWrite()` function but it doesn't work at all. I looked at #194 but the pins 5 and 6 of the Arduino Uno use…
-
This program works in core 1.3.6 In 1.4.7 all I get are nonsense values like the program is reading a floating pin. The count (not flow) is high like 16K plus so I figure that must be high frequency…
-
**Issue by [Roxy-3DPrintBoard](https://github.com/Roxy-3DPrintBoard)**
_Thursday Mar 17, 2016 at 22:41 GMT_
_Originally opened as https://github.com/MarlinFirmware/MarlinDev/issues/395_
---
This is…
-
Currently i use Attiny85 with micronucleus and in arduino IDE i have to add "digispark" board repository:
`http://digistump.com/package_digistump_index.json`. But they only support ATTiny85 and ATTin…