-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
pip3 on Raspbian. Tested versions of ESPHome - develop and 1.14.3
Tested arduino_version: 2.5.2 and 2.4.2
**ESP (ESP32/ESP8…
-
Our BMP280 example added in https://github.com/fhunleth/nerves_livebook/pull/21 has a bunch of images that are adopted from Wikipedia etc. Ideally we want to take our own images and keep them in the l…
-
Hi,
I have an issue with the WxReceiver sketch, on a Motino R4, with BMP280 sensor and 868mhz rubber aerial.
Not sure if its my config of 3 transmitters (all in UK, so EU band)
Tx1 - Wind / UV…
-
I'm doing research for Weather Station. For that, I need to send a large number of values which will be more than 32 Bytes. Since the Max Payload is about 32 Bytes, I tried sending those data by using…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
Tasmota-sensors version 9.4.0 is identifying a BME280 as a BMP280.
As a result of the misidentification, the …
-
Hi
Happy to find someone with potential awnsers to my problem.
I am working with new Chinese css811 sensor with wich i am not able to have connection with the ccs811 library.
I tried unsuccesfu…
-
I'm experiencing an issue with not getting temperature readings for the above mentioned sensors when Klic-DA (Acts like a Thermostat) turns the heating off due to no demand or the unit itself switches…
-
## Current Behavior
The NOXE F4 FC from Banggood has been updated to a new version labeled "V1". The "old" target NOX does not work on that new hardware version.
## Desired Behavior
Support new v…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Docker
**ESP (ESP32/ESP8266, Board/Sonoff):**
ESP32. It's a liligo tt-higrow (https://github.com/Xinyuan-LilyGO/TTGO-HiGr…
-
See https://github.com/letscontrolit/ESPEasyPluginPlayground/pull/176
It should be documented that this sensor cannot (!!!!!) be used along with any other I2C device.
Not tested if it may work alo…
TD-er updated
3 years ago