-
Helpdesk ticket 10120
User notes that WindowMaterial:SimpleGlazingSystem U-Factor maximum is 7.0, but the reported U-Factor in output is never more than 5.828. ASHRAE Standard 90.1-2007, skylight U v…
-
Two questions:
1. How do I control NameID format. Many applications require a specific format. Or it specifically be set to unspecified.
A while ago I saw an example specifying it in a format attribu…
jnxxx updated
4 years ago
-
On both the _Crude Oil Stabilization_ and _Crude Oil Dewatering_ sheets, there are unit issues for the fuel consumption calculations. For the NG consumption there is an IF statement that would always …
-
On both the _Petcoke Transport_ and _Crude Oil Transport_ sheets, the energy intensity (origin to destination AND back-haul) is calculated with a multiplicative factor for the "load factor". Based on …
-
## How should Brick represent units?
This RFC continues [this](https://groups.google.com/d/topic/brickschema/qmDxQi8LM5o/discussion)
1. Introduction
Unit is a primary metadata to interpret/pro…
jbkoh updated
4 years ago
-
A test controller which combines the test stage to simulate stage movement and the testcamera mosaic mode to return images from the test mosaic image based on the stage coordinates. This allows simula…
-
**Describe the bug**
Mobile hotspot turns on and other devices can connect but other devices can not use internet via mobile data but if phone is connected to a wifi network. Other device can use int…
-
BPTC is a baseline feature of D3D11, so it's pretty widely available on PC now, and consoles support it as well. ASTC support on PC is limited to Intel, and on mobile is limited to Tegra and Mali, bu…
-
Double-check and fix the data in HPEbP Hydrogen Production Efficiency by Pathway.
In an email from 10/8/19, Robbie wrote:
> I think our values for hydrogen emissions are too low. I think this an…
-
**when unbonding, Metamask shows failed but etherscan still pending for hours.**
TX Hash
0xa86963148bd6db184b260fd5e1d5f02b90a633aedc7614c59d7f1582370f2729