-
have errors need help
![image](https://user-images.githubusercontent.com/13913400/208186367-64bd880b-9956-42dd-9e7c-2315aabc3e1f.png)
i want write my starline decode metods for gnu radio, i ha…
-
Hi,
first of all thank you for that project. Hopefully i am able to get it running. I am currently working on the setup and have some questions.
1) I've installed WiringPi via NPM. Is it just to…
-
Hi,
I'm using your code on a ESP8266. Works great so far.
I own a Bresser 5-in-1 Art-N°: 9602510 (new one), which uses the same protocol as a Bresser 6-in-1.
In MQTT i only get a message without r…
-
In src/modules/CC1101/CC1101.cpp:
In CC1101::receive():
```
// wait for packet or timeout
uint32_t start = _mod->micros();
while(!_mod->digitalRead(_mod->getIrq())) {
_mod->yield();…
-
**Have you look for this feature in other issues and in the wiki?**
Yes
**Is your feature request related to a problem? Please describe.**
No
**Describe the solution you'd like**
A way to be …
-
### The problem
If a signal is received during a transmission, the board crashes and restarts. This is particularly likely in my setup since I'm sending and receiving through the same pin (so the b…
-
There are similar looking 433MHz modules on the market. The pin assignment does not fit to the ones ordered. Might be interesting to correct the PoC pcb for the pin assignment of the module that is mo…
-
I was able to compile fine, but when I run:
sudo PORT=/dev/ttyUSB0 make flash
It looks like it's trying to flash the Evil Crow. Lights on it are blinking. Then, I get this: Any ideas what I'm do…
-
Hi Matthias,
I have used your code, and also that of @Uspizig to output the bresser data on the screen of the ESP32 board.
I have put the code in my own repository here: [https://github.com/mczakk/…
-
I'm connecting my MTN via USB to a Raspberry Pi running SignalK/OpenPlotter. The Raspberry also has a GPS dongle attached, and SignalK forwards all the GPS NMEA sentences to MTN and onwards to Microne…