-
3D Printer ZoneStar Z9V5 Pro
Controller: ZM3E4
https://github.com/ZONESTAR3D/Control-Board/tree/main/32bit/ZM3E4
Configs:
https://github.com/Z9V5PRO/Z9V5Pro-MK4-Klipper
[printer]
…
-
Hi, sorry for this (probably) stupid question. i have a raspberry pi 5 and i need to use it's gpio to control 6 channels of normal dmx512.
I enabled the uart plugin and connected wires to some pins…
-
The fine people at Embest Technologies have agreed to provide the source for the MCU Power Control on the Pi-Desktop add-on board so I can make some fixes. The firmware controls a STM8S MCU. I am wo…
-
The treadmill controller is kaput. We need to try to repair it or make/find a replacement. We could start with the meetshop and see if they can fix it or maybe we can pay DEMO to fix it. Asking Jan va…
-
```
What steps will reproduce the problem?
1. Complete puzzle
2. Ok after congratulations, then change one number.
3. Change number back to correct value.
What is the expected output? What do you see…
-
Hi!
Is it possible to use different Zigbee module.
Instead of E18-MS1PA1-PCB to use E18-MS1PA2-PCB.
I know of differences between two of them but looks like every module sold now on Ali is PA2…
-
## "This device only supports 1 light level. Dim feature deactivated."
This message is shown when your device does not support dimming your flashlight. You can still use basic flashlight features o…
-
* [x] define property or method on `Game` class that returns current player color
* [x] use above property to control whether or not the `Board` component accepts clicks
* [x] also reject the move i…
-
Hello everyone!
I bought a hoverboard used to try to convert to a cart controlled by a raspberry Pi via serial communication. The principle is not to give problems.
However, I am unable to modif…
-
I'm trying to test the capability of controlling hardware (e.g. LEDs) on the board using Google Voice Assistant. When I give the commands "Turn on" and "Turn off" to control the LED using the NXP i.MX…