-
I was wondering if there was any progress on installing the ALPR module on a raspberry pi? It appears Paddleocr is the issue. Which I've tried installing to no succes.
Thank you
```
23:08:25:Prepar…
-
Leave below as comments your memos that grapple with the topic of climate change, inspired by the readings (Synthesis report from IPCC5, IPCC Special Report: Global Warming of 1.5°C, Bill McKibben's “…
-
I have been all through the closed issues here, and double-checked everything I could think of.
I have 2 devices plugged in: Z-wave stick, and google coral accelerator.
- The files are raw/binary, n…
-
### Describe the problem you are having
From my research and testing, it seems that using a Google Coral USB based TPU, you *first* have to flash firmware to the device. (then if power is cut to t…
-
### Describe the problem you are having
Hi,
I trained my own model using this tutorial:
https://colab.research.google.com/github/google-coral/tutorials/blob/master/retrain_efficientdet_model_make…
-
Running SSD mobilenetv2 I get in the log the following warning:
`Fallback unsupported op 32 to TFlite`
Axis Device Model: AXIS P3267-LVE
Firmware: 11.6.94
Model Architecture: Mobilenet V2 SSD (…
-
I receive the following logs and lose control of all connected Zwave devices, prompting a total reboot of my Home Assistant Yellow.
Driver: Failed to initialize the driver: ZWaveError: Timeout whil…
-
### Describe the problem you are having
When I am trying to enable OpenVINO detector with device=GPU I can see the error in log and Frigate becomes inactive for a while. If I set device=AUTO it start…
-
### Describe the problem you are having
I am running frigate 0.12.1 in a privileged proxmox lxc container where I am running docker with portainer.
At first I had a mini pcie coral which worked fi…
-
### Describe the problem you are having
With camera everything works very good, but when I tried to add camera to HomeAssistant then I can see the picture, but none of the entities are working and bu…