-
**Application version**
4.4
**Platform**
Windows 10
**Printer**
Anycubic i3 Mega
**Reproduction steps**
1. Loaded this STL https://www.thingiverse.com/thing:1475453
2. Selected Tree Supp…
-
I have followed the instructions for calibration and run into an issue. figured out the Z offset to be -1.6. I entered this into my firmware, compiled, and reflashed. I checked the location of the no…
-
**Describe the bug**
When attempting to compile the TMC2208 version of the Marlin using ArduinoIDE, multiple instances of a variable no declared occurs.
The first was"wait_for_user" was not dec…
-
I start the printer and release the motor and set the x position to the left side.
After this I start a print job (chessman) via octoprint 1.3.12 on octopie 0.16.0.
At the end of the job the hotend …
-
I create a new material with default printing temperature of 240°C and a default build plate temperature with 85°C
If I select this material and go to the print settings of the project the printing…
-
Hi,
i'm desperatly trying to get my printer working with 32-bit hardware.
I use a (heavily) modified Ramps 1.4 Board on top of an arduino due with TMC2130 for X,Y,Z and E0.
The first time I used …
-
hi, I am new here and just have a question but couldn’t find the right spot or button to post it, so I did it this way. With your latest version of Firmware WITH the use of BL Touch, what does the any…
-
Just started today after I started a calibration print. Scaled my cube changed some settings in the sidebar then after slicing and hitting print went to the monitor tab to abort because I forgot to ch…
-
**Application version**
(4.2)
**Platform**
(Mac OSX)
**Printer**
(Anycubic I3 Mega)
**Reproduction steps**
1. (The printer that I use requires me to print the material at 245ºC, it's …
-
**Application Version**
20191003
**Platform**
Win10
**Printer**
Anycubic i3 Mega
**Steps to Reproduce**
Set "Small Feature Speed" to 50%, set "Minimum Speed" to certain value (e.g. 15 mm/…