-
The version of NodeJS shipped with Edison is 0.10. This is not really a stable version and not usable for serious things.
The upgrade to a more recent and stable version (even 0.12.7) is not easy and …
-
你好,上次我有来问过
按照你的说法我打开startkit.sh并且使用里面对应的传感器服务,仍然无法顺利与传感器接轨
我的具体做法是:
在D2口接入了触摸传感器并在iot上添加传感器服务,PIN口填写了2,然后在UI窗口加入了Linechart并且连接进行测试,成功导入工作流之后,linechart只是自己随意地在变化并没有根据是否触摸来变化,我也试过UI中的switch,它则是毫无反应。PIN口…
-
ACME currently supports PIO1. PIO2 has introduced some changes to the existing interfaces and the code (components) in ACME needs to be modified to support the PIO2 interface.
- PIO_OFFSET is replaced…
-
Has USB OTG been tested? I can't seem to get our board to recognize a Dexcom (or a Kindle) connected over USB OTG. `lsusb` does detect the OTG cable itself, though, as a USB 2 and a USB 3 hub. Wond…
-
Report from @jonbob:
I ran some further tests, and we appear to be OK on edison -- meaning exact restart test pass. But very different behavior on cori, which I assume is due to the newer version of t…
-
Could someone help me?Hi,
I need to use nodejs 4.4.0 on Intel Edison and I tried to compile upm starting with "make jsupm_i2clcd" with many errors. The first one:
make jsupm_i2clcd
[100%] Building CX…
-
Hi again!
I am trying to explore the Echo service example from a peripheral (an Intel Edison) running Bleno. On the central side I use the following noble-device code: https://github.com/embeddednode…
-
I would like to add support for the [Grove - Temperature & Humidity Sensor](http://www.seeedstudio.com/wiki/Grove_-_Tempture%26Humidity_Sensor_%28High-Accuracy_%26Mini%29_v1.0) that is included in the…
-
The edison miniboard provides two uarts at its expansion pins but only one is configured in intel_edison_fab_c.c
It needs something like the following:
```
b->uart_dev_count = 2;
b->uart_de…
-