-
### Hardware:
Board: ESP32 DEVKIT V1 (www.doit.am) Based on ESP-WROOM-32 Module
Core Installation/update date: 18/jul/2018
IDE name: …
-
I currently have a NodeMCU ESP8266 device which successfully connects to IoT Hub and receives messages from it, great!
My sketch hard codes the key in the connection string which I don't like, als…
-
can not upload device with (button A and reset) . After device-upload .
"Please hold down button A and then push and release the reset button to enter configuration mode." can not work
![az3166_…
-
Suggested by @jonbgallant
Current images have glare. Even consider a lightbox.
liydu updated
6 years ago
-
Reproduce: Plug in Azure IoT DevKit, the port on the right bottom still points to the irrelevant port.
Expected: The extension automatically detects the right port and switch to it.
liydu updated
6 years ago
-
A bug was reported for the MRAA library that the SPI frequency cannot be set higher than 500kHz:
[https://github.com/intel-iot-devkit/mraa/issues/255](https://github.com/intel-iot-devkit/mraa/issues/…
-
- **OS and version used:**
- **SDK version used:** 1.2.4
# Description of the issue:
I call IoTHubClient_LL_SendReportedState() in a device twin callback function and it will cause t…
-
When flashing the firmware of the MXChip with the IoT Central firmware, it may take some additional steps to have the firmware be recognized.
https://www.linkedin.com/pulse/mxchip-devkit-iot-centr…
-
Hi, I found [this](https://learn.sparkfun.com/tutorials/sparkfun-inventors-kit-for-edison-experiment-guide/appendix-e-mraa-pin-table) webpage which also gives a mapping from MRAA number to Arduino. An…
-
Hi,
This page for example hosts 7 JPEG images ranging +1mb in size:
https://microsoft.github.io/azure-iot-developer-kit/docs/projects/devkit-translator/
![image](https://user-images.githubuserc…