-
Hi,
Thank you for this project! I followed your directions and got my package of 5 quickly from JLCPCB.
However, it's not entering DFU mode. Any troubleshooting I can do? Measure voltage(s) some…
-
I am new to your plugin, and trying to learn how it will integrate with my design style. I design everything from the schematic and only do the PCB when I like everything in the schematic, so that me…
-
Testing shows the DS1307 on my board is running it about +21.5ppm.
We should maybe replace with the [NXP PCF85263A](https://www.digikey.co.uk/en/products/detail/nxp-usa-inc/PCF85263AT-AJ/5170041). …
-
Is there a CPL file available to request a quote from JLCPCB for board and assembly?
The link given in connections_board/info/ is only for the board.
When chatting with JLCPCB today, I was advised…
-
Hi,
first of all thank you for making available this project. I am interested in buying one assembled pcb to play with, so I tried to use jlcpcb.com. However, it looks like the MAX5026EUT+T is unav…
-
During the team discussion of 20240116, we spoke about the maximum current into the heaters which the Control Assembly might provide into the incubator heaters. Each of the heating pads (Sparkfun COM…
-
Hi, are you getting the boards assembled or are you doing the SMT soldering when you receive the boards?
-
Lee created a new OLED footprint.
This footprint will work with the JLCPCB SMD round nut to mount the OLED with a 2Mx6 screw
SMD Round nut:
TH162050CTJ
Manufacturer Sinhoo
MFR.Part # TH162050CT…
-
какой же корпус ключа выбрать?
https://jlcpcb.com/partdetail/DiodesIncorporated-ZXMS6005SGTA/C174042
https://jlcpcb.com/partdetail/Stmicroelectronics-VND7NV04TRE/C155605
https://jlcpcb.com/part…
-
I was able to get a gerber/bom/cpl loaded properly on jlc but the costs are extremely high. Do you have any suggestions on how to bring those down a bit? Or is this not economically viable to order in…
idank updated
10 months ago