-
Hello G6EJD,
first of all: Thank you very much for this project and all the hard work you put into it. :)
I updated yesterday from v8 to v13 and found some minor issues which I like to report to…
-
Hi, @rafaelje
This is a report from @g-bougard
Android - Inventory Agent by @flyve-mdm 0.1.0:
```XML
Li-ion
0.0c
4.278V
99%
Unknown
Dis-charging
```
Linux FusionInv…
-
hello, flutter release following guidelines for Building aab (sign, proguard and minify) is not working on device. After publishing the aab on my playstore test group and after installing the app I go…
-
I tried to compile this version, and got the following error:
Arduino: 1.8.8 (Windows 10), Board: "Generic ESP8266 Module, 80 MHz, Flash, ck, 26 MHz, 40MHz, DOUT, 1M (no SPIFFS), 2, v2 Higher Bandwi…
-
The CosmicWatch paper has a really nice plot of count rates during a flight. I'm wondering how many people have tried this measurement and if they'e experienced any problems getting the detector throu…
-
Questions the message should answer:
* Charge level
* Health
* How long it will last
* Age / max charge level / capacity
* Battery ID
* Any fault indications
```xml
Bat…
-
Currently there is no battery under voltage lock-out (UVLO) on the power supply except for a builtin 2.15 V limit in the switch converter.
This is fine for alkaline/nimh batteries but would dangerou…
-
[home-assistant.log](https://github.com/home-assistant/home-assistant/files/2531676/home-assistant.log)
**Home Assistant release with the issue:**
0.81.0.dev0
**Last working Home Assi…
-
The analysis in issues #10 and #11 suggested that energy storage would not be an important aspect of the SPS design. Since then, in #23 showed that the battery storage had short periods of increased i…
-
Hello i have problem with some link and format like .TS
I use this link : http://linux-app.tv:6204/RDWAN/123/8092 this link play 11 sec then stop i need click on resume then she continue playing an…