-
Hi DerAndere1
Thanks for your work on the 4 axis display.
I have this issue compiling I followed your instructions and have commented out AXIS4_ROTATES and AXIS5_ROTATES in configuration.h
Spent mo…
-
## Here are the steps I follow to reproduce the issue:
1.With initial setup of the program, The program runs well, and I can produce a few components, But as soon as I stop the program while it …
-
"pip install --extra-index-url https--test.pypi.org/simple/ litexcnc[cli]" does not work on linuxCNC:
`
cedric@virt-cnc:~$ sudo -i
[sudo] password for cedric:
root@virt-cnc:~# useradd -m testuser
…
-
We currently have instructions on how to build LinuxCNC in at least four different places:
- /README.md
- /docs/INSTALL
- http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Installing_LinuxCNC
- http://wiki.lin…
-
I discovered a surprising feature of LinuxCNC I suspect is a bug. At least it break the principle of least surprise for me.
In short, the loaded G-code program is executed in some kind of sand box…
-
My G-Code:
`
(Generated with: DXF2GCODE, Version: Py3.6.7 PyQt5.12.2, Date: $Date: Thu Jan 3 16:29:29 2019 +0100 $)
(Created from file: ....)
(Output format description: G-CODE for LinuxCNC)
(T…
-
HI.
I noticed that grblHAL supports many different MCUs, and I am curious if there are any differences in the output pulse frequency when driving motors with these MCUs, such as RP2040, which has P…
-
as the title states.
please only use this thread for questions and discussion and open new feature requests for actual issues with OpenCNCPilot.
Martin
-
## Here are the steps I follow to reproduce the issue:
1. Install Fedora IOT and clone linuxcnc repo using git [this link](https://linuxcnc.org/docs/html/code/building-linuxcnc.html)
2. Install …
-
Terän pituuden mittaamiseen automaattisesti tarvitaan anturi, "tool length sensor". Hyvä olisi että anturi toimisi myös ohuille 0.5mm piirilevyporille, eli sen aktivointivoiman pitää olla pieni tai si…