-
**Describe the bug**
When CONFIG_SMP is configed.
we call `irq_lock`, we will call `z_smp_global_lock` and set `global_lock`: https://github.com/zephyrproject-rtos/zephyr/blob/8e69dafccf25bc5b40…
-
The rp2 suffers from a performance problem reading from the UART, most likely getting received bytes out of the FIFO and into the RAM in time.
The problem becomes more obvious the higher the baudrat…
-
When I try and compile the shining keyboard example on an MBED board running version 1.3.0 I get the following errors:
```
In file included from /Users/bsperryn/Documents/Arduino/shining_keyboard/…
-
# 环境:
- Module or chip used: ESP32-WROOM-32U
- Build System: CMake
- Operating System: Linux
- Using an IDE?: No
- Power Supply: USB
# 问题描述:
Secure boot 在不同分支,不同提交下,基于examples/get-started…
-
I was trying to get the 32.768 kHz LSE work for my STM32F103RE custom board to achieve higher timing accuracy for `k_msleep()` (not sure if this is the correct direction), but then I found out that th…
ycsin updated
3 years ago
-
### Hardware:
|||||||
|:---|---|---|---|---|---|
|Board|ESP32 Dev Module|
|IDE name|Arduino IDE|
|Flash Frequency|80Mhz|
|Upload Speed|115200|
|Computer OS|Windows 10|
### Description:
…
-
**Describe the bug**
I ran into the following issue trying to run the lorawan sample on the 96b_wistrio board: I get a Tx timeout error every time a join request or message is sent. Tried to join usi…
-
Hi
It might be a bug. When I create a sprite and define the frame list in GUX studio, the pixelmap ids shown in studio doesn't match those in the auto generated code. I hope you notice it and fix i…
-
I tried to compile the branch bootstrap+wifimanager and run in the promblem that 'lv_conf.h' is missing.
Can you solve the problem?
Here the Arduino output:
```
Arduino: 1.8.15 (Windows 10)…
-
**Godot version:**
Godot 3.2.3 stable
**Issue description:**
There was a regresión in profile time information, in older godot versions show five decimals in time column, now show two, which isn'…