-
### The problem
Integrations fails to connect to camera if HTTPS is enabled, if HTTPS is disabled the integration can login and functions as expected.
Camera
Software Version V2.800.00AC001.0.R,…
-
as i scrolled through your code, looking for a polling timeout-parameter,
i found a hardcoded image-url .
https://github.com/henry-spanka/node-red-contrib-hikvision/blob/master/hikvision.js#L143
…
ozett updated
4 years ago
-
Some camera's come with motion detection. I would like to have some way for neolink to signal that motion was detected.
For now I think just printing to std-out but ultimately I am thinking of some…
-
# 🐞 Bug Report
### Affected Services [**REQUIRED**]
The issue is located in: V3 latest code
### Is this a regression?
No
### Description and Minimal Reproduction [**REQUI…
-
If you had success with this example, please reply to this issue.
In your reply, please indicate the following:
- camera model
- frames-per-second used
- latency you achieved
- anything else in…
-
Hello, I hacked my camera: (hardwareversion ":" M16S_A2_V10_F37 "," firmwareversion ":" ppstrong-a3-tuya2_lsc-4.0.6.20210311 ")
The rtsp stream is working fine thanks.
I wanted to test telnet and li…
-
Hey guys,
I came stumbling along this project when I was trying to get my tuya based doorbell to show its stream on my smart TV when someone rang the bell.
All I needed was the rstp stream and al…
-
After update on Fulhan the system is rebooting after 10-30 seconds on start.
I did try without success:
- change mem=32M +/-2M
- disabled all majestic services
In previous version disabled JPEG …
-
Hi guys,
I tried to downgrade my MJSXJ05CM camera from 3.5.1_0052 to 3.4.2_0062 firmware but it didn't work.
The tf_recovery.img that I used was the one which can be found at https://github.com/cm…
-
### The problem
When I access the Reolink E1 Pro camera (hw IPC_513SD5, sw v3.0.0.2356_23062004), I always get the following message in the log:
```
Logger: homeassistant.components.onvif
Source…