-
Dear Andrei,
First, you did a great job in this project, congratulations.
I´m having problem to compile the code, and think this is because Reset_Handler (reset vector) is missing, attached imag…
-
# Summary
The layout of 20240421 has poorly placed Power Jack.
The PCB will interfer with fingers
![image](https://github.com/nk25719/KiCad-esp32-6leds-2switches-1pj-circuit/assets/5836181/8801f…
-
I have the synth all built and as mentioned in another issue I used the MXD1210CPA+ instead of the DS1210. I am able to flash the Atmega using an Arduino and set the fuses to E:FF, H:DF, L:E0, or E:…
-
Hello,
I am working with a 2.1 Board for M50b25tu
I am having no start issue with no RPM values on Tach or in Tunerstudio.
I am getting 5 Volts at 1 and 2 pins on the crank plug(from the ECU) and…
-
**General info**
My gateway is currently running firmware version 20.4.0256-MR0-RA from Telstra in Australia
- Product: DNA0332TLS
- ISP: Telstra
- Countries Australia
- Commercial name from…
-
Hi, thanks for making this cool plugin!
I tried it out on a small board I'm working on, and I noticed that in my case in quite a few places it caused DRC violations that were not there to begin. In…
daf0x updated
2 months ago
-
### Prerequisites
- [X] I have read [FAQ](https://yaqwsx.github.io/KiKit/latest/faq/)
- [X] I have searched existing issues (including closed ones)
- [X] I use KiKit at least version 1.5.0 (older ver…
-
We are currently missing a standardized way to name our boards, symbols and footprints.
For the board part I was thinking about `_
-
Hello, First of all I want to congratulate you on this project. Very useful for bringing broken hoverboards back to life....
I have two pieces of this model and would like to be able to actuate them …
-
The cell voltage measurements of cell 5 and 6 (also cell 10 and 11 with bq76940) are influenced by the balancing current of the adjacent cell in the other cell group.
The voltage deviation depends on…