-
## Bug report
**Issue details**
**Setup:**
1. Set DISARM_DELAY parameter to 0 so that once the drone is armed, the motors keep spinning until explicitly disarmed.
2. Configure motor emergency…
-
Hello @reefwing, thanks for you work!
I'm trying the [AHRS](https://github.com/Reefwing-Software/Reefwing-AHRS) library for experiments.
![artificial](https://github.com/Reefwing-Software/Reefwing-…
-
Hi Kris, I have been trying to make my LSM9DS1 with your code. I just have a few questions.
I am using madwick filter on an arduino uno.
`MadgwickQuaternionUpdate(ax, ay, az, gx * PI / 180.0f, gy …
ghost updated
6 years ago
-
## Expected Behavior
Package should be installed from RPM
## Current Behavior
```
# rpm -U ./expresslrs-configurator-1.4.2.x86_64.rpm
error: unpacking of archive failed on file /usr/sh…
-
Hello jeanrocco,
Your display solution sounds great!
Are you running a MQTT broker to that the autonomous portable temperature display subscribes to, or does the ESP8266 subscribe directly to t…
-
### Describe the bug
My foxeer M10Q 250 GPS module does not work on my 5 inch quad running betaflight. The weird thing is that I have the exact same module and that one works on this drone. Is it a b…
-
As the **A2plus assembly workbench for FreeCAD** gets more attention over time, users may have wishes for e.g. added features, added constraints to apply and convenience enhancements etc.
This thre…
-
Hey Kris, i wanted to get readings from two MPUs but since there is only one mag address the solutions i could find was using a multiplexer. Is there any other way? Should i consider using SPI interfa…
-
Hi! Thanks for the library, for now I use the 1.x branch of it in my project of open source [ESP32 based quadcopter](https://github.com/okalachev/flix). I'm not planning to switch to the newer version…
-
A widget that can be use to command a takeoff and land would be useful for quadcopter types
I think the widget should show takeoff when on ground and land when in the air. I think the actions shou…