-
### Describe the bug
I have intermittent system crashes with the following setup:
* Raspberry Pi 4B, rev 1.1, 4 GB RAM
* USB case: Axagon EE25-XA6 (ASMedia ASM225CM, enabled UASP and TRIM, USB 3.…
-
### Describe the bug
Fujitsu Futro s930 (AMD GX-424CC 4 core 2.4 GHz x86 64 bit processor, 4 GB RAM), HP NC552SFP dual 10GBit SFP+ pcie card. Openwrt 23.05-rc2. BIOS and NIC firmware upgraded to late…
-
### Description
I have been having issues with DOTA on 10gbit lan for a long time. It seems to be on and off,.
I'm using a UniFi Switch XG 16 switch on ethernet.
The issue mainly seems to be with…
-
Hello Everyone,
I'm looking for a definitive answer.
On the Internet, there is a lot of talk about Multipath and Multi-Session bundled under MPIO.
So I would like to go through an Example to …
-
Wifi guest vlan -> HAP AC -> RB4011 -> CRS326 -> 10Gbit -> PC
Guest vlan -> HAP AC ->…
-
The vast majority of the `plaintext` results are not possible on 10 Gbit ethernet.
The maximum transfer speed of 10gbit ethernet is 1,250 megabytes per second.
The minimum valid http response fo…
-
**Describe the bug**
I noticed severe network penalty using the default network/tap setup instatiated for toolbox containers On a 10Gbit connection to a NAS with 20G of bandwidth available to the…
-
### Community Note
* Please vote on this issue by adding a 👍 [reaction](https://blog.github.com/2016-03-10-add-reactions-to-pull-requests-issues-and-comments/) to the original issue to help…
-
Hi,
I have issue to use iPXE with 10Gb/s network adapter. The motherboard have 2 NIC 1Gb/s(work fine with iPXE) and 10Gb/s (that failed)
Aquantia 10Gb/s = Marvel AQtion 10Gbit = Driver aqnic650s…
-
## Describe the bug (🐛 if you encounter this issue)
The issue is complex, but there were a side effect which is user created snapshots are deleted on replica rebuild.
![Screenshot 2023-06-15 at …