-
please take time to update the linux kernel to 6.6.y stable and work on updating the dtb/dtsi files to match the new format. also please join the emmc and sd dts in to 1 file as it should work as the …
ksbjr updated
5 months ago
-
Hi, is it possible to use an Arduino to write the counter on a cassette and if yes are you planning on writing some kind of tutorial?
-
**Test case**
```systemverilog
// Input to the formatter, preferably a reduced test case.
module_a_top(
.signal_a (wire_signal_a),
.long_signal_b (wire_long_signal_b)
)
```
**Actua…
-
See [FM24CLXX FRAM datasheet](https://www.waveshare.com/w/upload/e/e7/FM24CL16.pdf) and [dev board](https://nl.aliexpress.com/item/FM24CLXX-FRAM-Board-FM24CL16-F-RAM-Serial-3-3V-Memory-Evaluation-Deve…
TD-er updated
9 months ago
-
I am running 202306 and 202308 SD card images.
VisionFive2 boot SD card is fine but warm boot is shutdown instead, i.e. it cannot be reboot.
Any idea?
-
Some software titles may not be supported on RISC-V in general, or because no RISC-V binaries or packages are provided yet. Most of these cases have been identified already and related software titles…
-
**Describe the bug**
Flash eMMC thru boot menu fails when using a Samsung 256 Pro Plus SD card. Selecting 2 ends up at `(initramfs)` prompt.
**Describe which image you are running (example: bone-…
-
The 24cxx family i2c eeproms expect to receive the address of where you want to write before the actual data you want to write.
So we should be writing to i2c 2 elements (via src): address, data
…
-
-
I compile the kernel with tag VF2_v3.0.4 and when boot it i got: [drm:inno_hdmi_bind] *ERROR* cannot get hpd gpio property
and a kernel panic.
> [ 0.000000] Linux version 5.15.0+ (user@starfiv…