-
I came across this paper which presents a technique to increase speed and maintain print quality. Just wondering if the BCN3D community is aware of it, or whether it could benefit the BCN3D controller…
-
any plans to offer a micropython port for standalone operation?
-
Makercart project, a pop up makerspace for academy, libraries and community groups. It has a 3d printer, digital cutter, electronics, micro-controllers and robotics. It aims to lower the barrier to di…
-
HI again
what I wanted from this issue to know what tools do I need to change the user interface of Monkeyprint
maybe I am not helping too much here because I don't have enough programming skills i…
-
hi, I accidentally connected the 6-wire connector backwards. After I discovered this and connected the connector correctly, the controller behaves strangely: if the EN pin is connected to it, the cont…
-
[Resin.io](https://resin.io/) provides a standard containerisation platform for embedded devices.
One of the biggest problems with installing + distributing opengb is installation and upgrades for va…
-
## Blogs
- https://github.com/Staok/thoughs-about-hardware-design
- https://www.emoe.xyz/all-about-electronics/
- https://www.analog.com/cn/resources/reference-designs.html
- https://www.envox.eu/…
-
I have a Type A Machines Series 1, serial number 00000247. PSU lights up when connected, USB B is plugged into Arduino and the other end is plugged into my Mac. Nothing is detected is in `System Repor…
-
I recently added a feature in cncjs-shopfloor-table to highlight the GCode line that is currently executing on the machine. It works for g2core. I'm not sure if it is possible to implement accuratel…
-
Marlin to support dual-core ARM4 controllers to separate G Code processing from peripheral control like display.
Benefits:
1. Dual-Core ARM 4 Controller available up to 220 MHz
2. ARM3-Core to excl…