-
Hi,
I have an eGPU enclosure here which uses Thunderbolt 3 and it is connected to a Linux laptop with an AMD CPU + USB-C/USB4 port (40gbit/s). From the speeds I get in memtest_vulkan it seems to me…
-
Related to #12202 but without CUDA. On our shared-memory system (2xEPYC) MPI_TYPE_INDEXED works fast as expected, but as soon as our 40GBit Infiniband gets involved performance breaks down by a factor…
chhu updated
4 months ago
-
I am running a any2any meshed flowgrind test on the following setup:
- 9 machines (192 GB RAM, 2 x E5-2680v4 2,4 GHz)
- all nodes a communicating with all other nodes
- Flowgrind 0.7.5-2
- Ubun…
-
The M_10q series are DIRT CHEAP right now and make great HomeLab machines.
It would be great if we could expand your mod to get a second M.2 slot on these, and other Lenovo models as well.
I purch…
-
The libreqos.io project is using XDP + EBPF + cake to schedule packets for 10s of thousands of customers. There appears to be a performance wall we are going to hit as we try to crack 40Gbit. In looki…
-
Hi, i looking for way to change refresh rate from 60hz to 120hz. Didn't find anything so i decided to write here. I use TCL TV connected by HDMI.
-
In the following cases the VRAM usage is high and/or overshoots for me and makes the game slower (@ ~95%+ VRAM) or even very unresponsive (@ ~190% VRAM).
The cases are either: A) high-fidelity plan…
-
Hi, I understand that yes, OPNsense does have the Infiniband drivers enabled by default, it doesn't seem to have OpenSM and other utilities from the OFED package required to run a Subnet Manager to us…
-
In wire-interface status , we have an attribute **pmd-kind-cur.**
**pmd-kind-cur** is a leafref referencing the **/core-model:control-construct/…/wire-interface:supported-pmd-kind-list/wire-interf…
-
I am trying to set up jumbo frames on (some subnets of) my home LAN (in order to reduce the router load for large
transfers) and I'm struggling to understand how to set the interface MTU without manua…