-
I had gone through a program which are uploaded on link below :https://github.com/VectStudio/LED_CUBE?files=1
But when I simulate these code in proteus their is not effect shown on LED cube. Then I w…
-
Cube frame rate = 1309Hz
T = 764us (95us/layer)
T(off) = 160us (20us/layer)
T(on) = 604us (76us/layer)
Duty cycle = 79%
Drive the Darlington unit directly with MCU pins?
Try the latches instead of 16…
-
Hi!
I was wondering if you would ever code something similar for the larger 16x16x16 cube- or if there's a way to adjust this 8x8x8 to operate with the 16x16x16?
I've made some adjustments to t…
-
My question :
should your code be compiled and the Hex file uploaded with DebugTool.exe?
Or maybe it should be uploaded to the arduino and connected with RX TX signals to the headphone jacks on …
-
bonjour. est t il possible d avoir les quantité de PCB a fabriquer et si vous avez un lien éventuellement pour les commander et la liste des composent et matériel a commander que j essai de construire…
-
The visualizer code I just uploaded to the `visualizer` branch corresponds to this video:
https://www.youtube.com/watch?v=exQ43PFWJBU&t=9s
He's already created the 3D layout for us, so all we h…
-
cloning:
git clone https://github.com/hummypkg/picube.git
make install fails on the following:
util.c
gcc -static-libgcc \
\
-DPICUBE \
-g -o cube \
anim.o canary.o cube.o gpio.o jim…
-
### Describe the bug
If using a random area with a for each item widget the iteration never exits. The behavior is like that for each iteration of the area, a new random area is being generated and t…
-
Our local maker space and science center ([suncoastscience.org](http://suncoastscience.org)) has a 16x16x16 cube, and we really enjoy playing with it! Great job on the design and implementation!
Howe…
-
INCORRECTLY LABELLED VERSION:
"pc-152244" has no source other than Method... basically guessing (as no IRC log nor tumblr post points to 22:44). The correct version number is 152225, from the Tumblr …