-
Hello,
I just bought the OAK-D Pro W PoE and I want to activate the IR Projector but it looks like, that it doesnt work.
Here is my Code:
```
irState = self.device.setIrFloodLightBrightness(1000)
…
-
Hello Lee,
thanks for your help on my previous problem. Now I have another :)
I saw on your website http://www.arducam.com/camera-modules/2mp-ov2640/ that it is possible to take night photos using…
-
There are a couple instances of dual-emitter LEDs. For example, 660nm (red) and 940nm (IR). The problem is that these come in 3-lead common-anode packages. So to turn the IR diode "on" requires set…
-
#### Description
Seeedstudio Wio Terminal is a dev board with an ATSAMD51 MCU and Realtek RTL8720DN module for BLE 5.0 & Wi-Fi 2.4G/5G
The MCU is the ATSAMD51P19 (SAMD51 is already [supported b…
-
In the defcon slides, you put both 904 and 940 nm for the wavelength of the light. One lidar vendor's specs say 904, and [Wikipedia](https://en.wikipedia.org/wiki/LIDAR_traffic_enforcement) says 905. …
-
Get Started with Wio Terminal
The Wio Terminal is a SAMD51-based microcontroller with Wireless Connectivity powered by Realtek RTL8720DN that’s compatible with Arduino and MicroPython. Currently, w…
-
For some reason, the hardware in the Phoenix is only triggered when the custom tagger is within a few feet of the Phoenix. Best guess is that the IR LED is not bright enough. This could be fixed wit…
-
Hi. how far into the UV and IR does the raspberry PI camera go? If any?
-
Hi henning2323, first I wanted to thank you for sharing the code.
Seeing that there was a free code option, I was encouraged and built my weapon following his instructions and adjusting the buttons…
-
Hi,
Are you interested in making a better camera?
Using OV5640 and using LORA to transmit pictures over a long distance are mainly used for wildlife observation.