-
### The problem
I'm setting up a stepper component and I have run into an issue where the motor won't turn any faster, but isn't having any torque issues and is otherwise running as normal.
The …
-
Hi, I've with sucess connect moppy with floppy drives (and play midi) but now I'm trying to play midi on NEMA stepper motors. I connect A4988 driver with stepper motor but this not work, motor didn't …
mipat updated
6 years ago
-
https://www.amazon.fr/gp/product/B00LOF1CA2/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UT…
-
I have the same motherboard and was looking at your VS code. First question is does it work? I don't have a sensor mounted yet nor do I want filament run-out yet. Something stuck out that you have E2 …
-
Is the A4988 driver actually supported? There is conflicting information between the repo and the docs:
The readme links to a A4988 driver crate, but the crate doesn't exist.
The documentation on …
-
Hello,
I have noticed with the traditional drivers that microsteps are NOT all equal.
For example at 1/8th using an A4988, the various microsteps are definitely not 0.225° appart (360/200*8). Al…
-
Need KiCAD files of our own version of https://www.pololu.com/product/1182 carrier board
We have ancient never fabricated old kicad files at https://github.com/rusefi/rusefi-hardware/tree/main/A498…
-
Didn't know where to put this, so sorry for that, but it made such a difference with my belted z setup that I had to share.
After something like two years of using this mod, I decided to try PC wh…
-
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
The board reboots while homing the Z-axis.
The issue occurs inside the `do_homing_move()` …