-
I am trying to plot serial port real-time data (pico and ads1115) with the following julia script:
```julia
using Plots, DataStructures, LibSerialPort
using Plots:px
# plotting setting
plot_f…
-
### The problem
Setting up 2 ADS1115 with 4 ct clamps sensors each, and using continuous_mode: on gives one sensor with wrong value.
With continuous_mode on, one random sensor will show a value on…
-
I am testing this with a multimeter. Comparing this sketch:
https://github.com/adafruit/Adafruit_ADS1X15/blob/master/examples/singleended/singleended.ino
...with this nearly identical sketch fr…
-
I have a feature request that will help while connecting and coding **I2C devices**.
Often times I face the issue that I don't know the **I2C Addresses** or if a Device is fully utilized and detec…
-
4 channel ADC device would bring analog readings to boards that do not have an on-chip ADC available.
- Device: ADS1115 (possibly ADS1114 and ADS1113 as well)
- Datasheet: [TI ADS111x](https://www…
-
I am trying to make a handbrake with a load cell and I was wondering if it is possible to use it with an ADS1115 and how it would be connected correctly to the STM32.
I know how to connect the ads111…
-
### Describe the bug
As discussed with @dagar and @dk7xe in the developer call, the issue regarding the ADS1115 with 6x:
While using the HolyBro 6x with an ADS1115 ADC we do run into a critical erro…
-
Hi,
i'm using the ADS1115 to measure two differential channels (0-1 and 2-3) for values upto 0.02 V (a 75mv/20A DC-Shunt)
I've quadruple checked the wiring and even used an external meter to verif…
-
### The problem
I'm trying to measure two different voltages but the ESP32 or ESPHome is mixing up the values with different multiplexer configs.
The first voltage via multiplexer: 'A0_A1'
The se…
cho0p updated
6 months ago
-
Hallo,
ich versuche vier Analogwerte (0-3V) über ein ads1115 board in meinem iobroker zu integrieren.
Über ein python skript kann ist die Spannungen, die an dem board anliegen anzeigen. Da ich "Debi…