-
I've been using Espurna on some RGB light bulbs (AiLight) and was planning to use these bulbs as part of my Halloween/Christmas light setup this year. The majority of my lights are WS28xx pixels cont…
-
Originally reported by: **Scott Wilson (Bitbucket: [Scotty86](https://bitbucket.org/Scotty86), GitHub: [Scotty86](https://github.com/Scotty86))**
----------------------------------------
On version …
-
My parents got one of these bulbs at Christmas time and I was curious, so I bought some for myself. I already use Espurna on two AiLight compatible bulbs but these Feit bulbs are brighter and have a …
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
### REQUESTED INFORMATION
_Make sure your have performed every step and checked the applicable boxes before…
-
### PROBLEM DESCRIPTION
I have around 20 devices that are running Tasmota 9.3 and I've upgraded one to 9.5. Since then this single devices has problems to connect to the MQTT server and reconne…
-
I have a bunch of Espurna devices scattered around my house. I enabled Alexa support on most of them so I can control them with voice commands.
I recently experimented with Homeassistant and the d…
-
### PROBLEM DESCRIPTION
If you set FIRMWARE_LITE flag you are not able to enable USE_MQTT_TLS option but only editing tasmota_configurations.h
### REQUESTED INFORMATION
_Make sure your have…
soosp updated
3 years ago
-
I just bought a Hue bulb to use for developing with this library and it appears to be unsupported. The bulb model shows up as "LCA003". It is a white+color bulb with Bluetooth and ZigBee that I boug…
-
Hello, I have been using AiLight for quite some time, great work! Recently I had an issue with with my router not being able to handle the number of devices connected to it and it would crash. I ended…
-
**Issue Description:**
Latest version (master 0.6 or develop 0.6.1-dev) fails to build with
> .pioenvs/dev/firmware.elf section `.text' will not fit in region `iram1_0_seg'
AiLight version: 0.…