-
I have upgraded to 1v1 just few days ago my Ankuoo NEO with HFEASY_WEB_UPGRADE.bin
Apart having lost all my configuration, the device keeps rebooting every hour so the light keep turing off. I don'…
-
Is there any chance of sharing sample code for interacting with the Ankuoo devices? Or more throughout documentation for doing so? Thanks!
-
Hi Luís thank you for all your work on this project.
I have Fashed though UART//Seral and Orvibo S20 WiWo-S20-E2 with the original HF software since this module is based on a HF-LPB100.
Was able t…
-
## The problem
Migrating from 0.109.6 to 0.110.1, everything is ok except all my Recswitch entities are no more defined
## Environment
- Home Assistant Core release with the issue:
- La…
-
I'd like to add support for this wifi multi socket (available on amazon.de and obi.de)
![image](https://user-images.githubusercontent.com/7150082/216632363-803918c2-2c96-41ed-a686-eaeedbb1c281.png)
…
-
I have 11 Ankuoo REC (wall module) devices on HFeasy 1.1.
Randomly, some of them go offline and don't connect again until I plug them off.
I had the same issue also on the former version of the firm…
-
Dear all,
I am working on a ankuoo plug device based on LPB130. I am currently trying to work on:
1) understand the schematic of PCB board;
2) porting of hfeasy firmware to the new MCU.
About po…
-
## The problem
I upgraded to 0.115.3 and my Neo Switches that uses the Broadlink chip stopped working.
## Environment
- Home Assistant Core release with the issue: 0.115.3
- Last worki…
-
I've been using the Ankuoo NEO wall switches & plugs in Home Assistant for a couple years and they have worked well. Thank you for your efforts. Recently I wanted to use an Ankuoo NEO Pro plug which…
-
I just got a couple of these switches and would really like to avoid having any data going outside my home (apparently these switches keep pushing data to their server about their state).
According…