-
-
First of all thanks for this IP, I'm using it in a research project on the University of Twente in the Netherlands.
However in commit 18d9aee1a3f5e97a7ab404067b02ca5286caf344 you introduced resetti…
-
STUDY AND UNDERSTAND THE PROTOCOL
-
In the `2024-10-16` build of the RP2350 Datasheet, under [Section 2.1.3 Atomic Register Access](https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf#2.1.3.%20Atomic%20Register%20Access) ther…
-
It's not possible to configure an environment without any master or with a passive master. This would be useful when verifying an APB master (e.g. a bridge).
-
Some of st code does this on stm32wb, but this only seems to be done once in embassy:
```
HAL_PWR_EnableBkUpAccess(); /**< Enable access to the RTC registers */
/**
* Write twice…
-
### Describe the Issue
autopilot check compatibility says i need to do some more steps to get ready, but dont say what _specifically_ i need to do
### Reproduce the Issue
![image](https://github.co…
-
In the attached diagram,
- one of edge with label "APB" is not connected to the Lamba block called "freqm"
- some of the APB labels are not placed next to their respective edges
- same for some …
-
### Description of Done
Accepted pull request covering
CORE-V MCU block diagram with main sub-systems
The top-level internal system elements and peripherals in the CORE-V MCU
Key blocks in the main s…
-
We need design files to write a testbench but there is a code for testbench and no design files