-
Arduino:1.8.19 (Windows 7), 開發板:"Generic STM32F1 series, BlackPill F103C8, STM32CubeProgrammer (SWD), Enabled (generic 'Serial'), None, Low/Full Speed, Smallest (-Os default), None, Newlib Nano (defau…
-
an implementation for standard firmata is [here](https://github.com/ajfisher/node-pixel/tree/master/firmware/build/node_pixel_firmata) based on Adafruit_NeoPixel lib.
As alternative, [FastLED](http…
-
Al intentar conectar Arduino y Código con firmata no me reconoce los imports y no permite conectar
![image](https://user-images.githubusercontent.com/106194320/232973821-e3f6e492-e411-40c3-a039-f40ab…
-
[hw.arduino] don't recognize any of my arduino devices with standard firmata on MacOS Monterey with M1.
`[hw.arduino] no available arduino devices`
Although It can see the port with @devices?:
…
60-hz updated
3 months ago
-
[`pyFirmata`](https://pypi.org/project/pyFirmata/) gives an interface to the [Firmata](http://firmata.org/) protocol for talking to Arduinos.
This could be a good way to make `labby` capable of tal…
-
I followed the steps shown [here](https://gobot.io/documentation/platforms/arduino/#ubuntu) and I got the following error.
![Error](https://i.imgur.com/6ujAavg.png)
Maybe I did something wrong, bu…
-
Hello,
i just a Raspberry Pi 3b+ witch is connected to a MEGA 2560.
I want to controll the Mega 2560 with Node-Red which is installed at the Pi to change the speed of PWM Fans.
The Problem is that …
-
I'm trying to use a firmata example for bluetooth which is supposedly compatible with the R1 Wifi but I'm hit with this error. I know this has been resolved with other boards in the past by adding the…
-
Hi,
We start using Firmata for some interactive projects mixing computer for UI and Firmata to control HW component.
Some of the HW (like Neopixels) have proprietary protocols, so we need to use…
-
I am looking for a C++ FIRMATA client Code for the Windows 10 client. I am not sure if I am missing something or just one needs to be proposed.