-
I bought a controller from Aliexpress in the 'classic' form factor (https://www.aliexpress.com/item/33003742445.html), with an Artery AT32F413RCT7 on the mainboard, and two sensor boards, one of which…
gnbl updated
8 months ago
-
Is there any way to use this core on a M1 Mac?
-
Hello All,
as you know by now STM MCUs are in very short supply and very expensive these days if you can even find them. We have seen prices go from $1.80 -> $10 -> $29 two weeks ago and still r…
-
这是我的eide项目配置文件:
```json
{
"name": "ChainSPI_Master",
"type": "ARM",
"dependenceList": [],
"srcDirs": [
"project",
"libraries",
".pack/ArteryTek/AT32F402_405_DFP.2.0.4/De…
-
Global variables use 2616 bytes of dynamic memory.
- WeAct Studio Official Link
- taobao: weactstudio.taobao.com
- aliexpress: weactstudio.aliexpress.com
- blog: www.weact-tc.cn
/home/webjorn/.ar…
-
Hello,
I bought a hoverboard mainboard off ebay in order to use this firmware, hover on arrival I realized that this mainboard seems to be newer and different to the ones currently used.
It featu…
-
I sucessful use FF with an 26-pin header Gotek Floppy and use it in my Tektronix TDS3000 series (TDS3012B) Oscilloscope. The PB and the LEDs are at the same pins. I have to remove the resistors RA & R…
-
这个框架都一年了咋个还不更新下，至少更新到在线安装就能使用arduino框架把，能直接创建工程吧，现在这就是半成品
-
If you check in the header file below ADC register ctrl2 has 2 bits at [24] and [25],
https://github.com/ArteryTek/AT32F421_Firmware_Library/blob/master/libraries/drivers/inc/at32f421_adc.h#L264
…
-
Can you provide the Makefile project?