-
It looks like `smartctl` is the only tool that can access NVMe drives hooked up via an NVMe-to-USB adapter (based on an ASMedia/jmicron/realtek chip).
It would be immensely useful if `smartctl` all…
-
### Describe the bug
Mixtile `nodectl` internally executes:
```
lspci | grep "^03\|^04\|^05\|^06"
```
And apparently the intended output is:
```
03:00.0 Network controller: Mixtile Limi…
-
Yes, the mXHCD.kext didn't work on Big Sur. Yesterday I tried a lot of things and nothing (genericUSBXHCI.kext too... I think there is a way to rebuild this kext with the last SDK but I can't do it), …
-
Hey, are you interested in the AsMedia chips? I've got two units here for testing and can provide any details you'd like.
-
Any chance of adding support for Asmedia Sata controllers
I have a card with much newer firmware than my other two
and would really like to be able to dump it
Unhandled exception. System.Exceptio…
-
### Describe the bug
Hello
I have a USB 3.0 NATEC NKZ-0448 3.5" sata hard drive enclosure
With Asmedia ASM235CM Chipset
In a Raspberry Pi 4B 4GB rev1.4
With latest firmware/bootloader 2022-…
-
Is the latest image tested with PCIe switches?
My CM5 boots with no issues on the RPI-CM4 carrier board. However, does not boot on a [NAS board](https://www.waveshare.com/cm4-nas-double-deck-c4a.h…
-
I'm running Windows 11 23H2 22631.4112 as WinToGo on a SSD connected via USB/SATA adapter. Since 9.4.x I get **BUGCODE_USB3_DRIVER (144)** crashes some seconds after I started CrystalDiskInfo.
Afte…
-
### Describe the bug
I am using a PCIe switch PCIe x1 to 4 x PCIe x1 successfully on the cm4 to access more than one PCIe board.
Now I try to migrate to RPI-5 with a M2-HAT and a DELOCK 62584 Adapt…
-
0x174c (ASMedia Technology Inc.)
AS2105:
Product ID: 0x5106
Version: 0.01
=
Thermaltake BlacX 5G Single
Dual HDD is useless...
http://web.archive.org/web/20210202000335/https://www.sma…