-
Hi,
I got my ft232 converter finally.I give it a try but unfortunately I get the following error.
I enabled the debug-wire on my device (lfuse:0xE2 hfuse:0x9F)
```
sudo ./dwdebug verbose,device
…
-
Hello there.
Probably a silly question but what are the fuse settings for this project? I use avrdude and normally provide fuse settings when programming.
Thanks
-
Running
```
./simavr/run_avr tests/atmega88_example.axf
```
yields
```
Loaded 1722 .text at address 0x0
Loaded 114 .data
Loaded 4 .eeprom
Read from eeprom 0xdeadbeef -- should be 0xdeadbeef..…
-
```
What steps will reproduce the problem?
1. Tweak the Make file atmega88 entry to lower the clock speed to 8Mhz
2. omake atmega88
3. use AVRDUDE to set fuses to Lilypad 8Mhz standard: DD,E2,04 (same…
-
```
What steps will reproduce the problem?
1. Tweak the Make file atmega88 entry to lower the clock speed to 8Mhz
2. omake atmega88
3. use AVRDUDE to set fuses to Lilypad 8Mhz standard: DD,E2,04 (same…
-
Hi, since a few weeks Hobbyking delivers the Red Brick 30A ESC with a Atmel MEGA88-15AT1. The ESC looks excatly like one with the Atmega8 I noticed it when I want to connetct the ESC with my PC and st…
-
```
What steps will reproduce the problem?
1. Tweak the Make file atmega88 entry to lower the clock speed to 8Mhz
2. omake atmega88
3. use AVRDUDE to set fuses to Lilypad 8Mhz standard: DD,E2,04 (same…
-
```
What steps will reproduce the problem?
1. Tweak the Make file atmega88 entry to lower the clock speed to 8Mhz
2. omake atmega88
3. use AVRDUDE to set fuses to Lilypad 8Mhz standard: DD,E2,04 (same…
-
```
What steps will reproduce the problem?
1. Tweak the Make file atmega88 entry to lower the clock speed to 8Mhz
2. omake atmega88
3. use AVRDUDE to set fuses to Lilypad 8Mhz standard: DD,E2,04 (same…
-
```
What steps will reproduce the problem?
1. Tweak the Make file atmega88 entry to lower the clock speed to 8Mhz
2. omake atmega88
3. use AVRDUDE to set fuses to Lilypad 8Mhz standard: DD,E2,04 (same…